|
Here is the paperwork on the equipment we use for the Repeater. If you
want to look at it, simply click on the picture to enlarge it.
(caution-large pictures, so it may take longer to download on
slower connections.)
(input) 147.885 (output) 147.285
Repeater Station Trustee: Robert Stark Sr. NØPDD
Repeater Station
Sponsored by: Robert Stark Jr. NØQZU
Repeater Special
Features: (ca) - Closed Autopatch
e -
Emergency power
o -
Open System Usually Carrier-Operated
(pl) Tone 100
Equipment: Diamond
5/8 wave Groundplane Antenna
50 ft. G25 Roan Tower
Two 12 volt deep cycle batteries wired in parallel
1 amp. 12 volt charger on a timer connected to deep
cycle batteries
Polyphaser lightning arrestors
Two 40 watt incandescent lamps on thermostat (for
winter)
Two 12 volt transmitter activated fans.
RC-1000 Repeater Controller with voice ID
4 Wacom Bandpass - Reject Duplexers
90 ft. Hardline Coax
120 volt surge protector
Inside/Outside temperature gauge
Inline swr/watt meter
Everything grounded inside to a 1/4 in. copper
plate with #4 solid copper wire to a copper coated
8ft. rod in ground outside
Everything, other than the Antenna & Tower mounted
inside refrigerator
Repeater is set at 18 watts out, and has a 1.1 swr
|
