Hi Todd,

Here's a brief summary of what I do.  I make a mold of the 
character that I want to make.  I use a latex mold that you
can buy at any craft/hobby store.  The latex mold is a liquid
substance that you need to paint on the object in layers.
Once it is done you can peel the mold off the object.  I let
it dry for at least a few days.

Next comes the casting part.  I use plaster.  I mix the plaster
with water and pour it into the mold.  I let the mix sit for
an hour to harden.  Once it is done I take the plaster out of
the mold and cut a notch with an exacto knife at the rear to
fit the PEZ regular.  I then let the plaster sit for three days
to fully dry.

After it is dry, I paint the object and then varnish it if 
necessary.  I use a hot glue gun to glue the object to the PEZ
stem.  I put the little black shoes on the bottom of the regular
to make it stand better.  That's it.  It is actually time consuming
because of the wait period for it to dry in various stages but you
can create the items you want.

By the way, how did you hear of my Fantasy PEZ?

Thanks,

Rose