Setting up your GigaHome Blast u4 Router

1. Connect the GigaHome Blast to a power outlet using the supplied power cord.
2. Connect one end of the supplied Ethernet cable to one of the LAN ports found on the back of the Internet access device provided by HBC (e.g., modem or ONT) and the other end of the cable to the WAN port on the back of the GigaHome Blast.
3. Boot up time is about 4 minutes. A solid green light indicates success! You are connected to the Internet.

For additional help or support contact Wizards Technical Support at (877) 457-9669.